1- CHARACTERISTICS :
An installation of MASSALIA heating elements for temperature increase lays on an insulating surface if possible. Then, just display on it pots of land or insert it in a box of land. MASSALIA elements can easily be stocked flat down or rolled up for insta nce if needed.
MASSALIA heating elements are delivered in strip fo rm, of 300,400,600 ,800, 900 or 1200 mm width,from 700 to 6600 mm lenght, and 0.5 mm thickness. External color is black. Due to its low contact temperature, MASSALIA element will only heat the land laid down on it. Therefore, the electric consumption is very low. Electric links are connected with multiwires cables brazed on the element. Besides, the element is fully waterproof and so allows the wattering without any risks at all.
4- REGULATION : MASSALIA heating elements, of substratum temperature.increase must be regulated in temperature through an external device.
5- WARRANTY : The warranty of MASSALIA heating elements is 2 years.
MASSALIA is an important reduction of constraint setting up with:
- Interventions reduced to the minimum.
- Very restricted places immobilisation.
- Controled an focused temperature increase.
After survey, the power to be installed is given according to the thempera\tab ture and the required timescale of increase.
The increase of maximum temperature is then calculated according to the power and the volume to be heated.
Must be achieved by a qualified compagny according up to date norms and legislation.
- Lays insulators flat down and fix it if necessary.
- MASSALIA heating elements are laid flat down only, on the insulating surface.
- Heating elements are linked together through a waterproof swictbox and connected to the sector via cable.
- General protection through a switch or differential cutout 30 mAmp per slice of 7.5 kW in mono and 13 kW in tetra.
- Then the substance to be heated can be laid on this heating surface.