HEATING FOR BILLIARDS

 

OUR PARTNERS

LE DEMEURE DU BILLARD BILLARD CARRINHO

IMPLEMENTED Of MOVIE

INSTALLATION MISE EN OEUVRE

You will cut up the borders of the movies, for them adjusted to the measurements of the plates of slates.

It is necessary to let, to the minimum 4 to 5 mm of insulator of every sides of the movies

For the stake in opens, of heating movie on your plates of slate, you have several possibilities.
  • By collage.
  • Fixing by staple.
  • Pinch between the slate and the supports Confinement of movie with a thermal isolation

    .TECHNICAL CARACTERISTIQUE:

    • Specific assigned strength (Said active): 110 to 440 W
    • Width: 300 to 1200 mm
    • Length: 700 to 6600 mm
    • Thickness: 0,070mm
    • Massage surfacique: 220g/ m²
    • Tolerance on value of the resistor: - 5% +10%
    • Tension of feeding: 80 to 230v

     

    OTHER DIMENSION And TARIFF

     

     

  CHOICE of the ADMISSIBLE MATIERES In HEATING FOR THE BILLIARDS

The blackboard below gives the value of the thermal resistor, valued for the heating for some materials pleased them used. When has it to use some other how registered matters below, it is not necessary to pass the maximum of the thermal resistor values below.

Matter of the insulator

Thermal conductivity (w/ m°k).

Thickness (mm).

Thermal resistor (m²°k/ w).

Strength of the

125 (W/m²).

heating

150 (W/m²).

element

175 (W/m²).

Panel of agg

lomerating

( density 600

(Kg/m3)

 

 

 

 

0.1

8

0.09

Yes

Yes

No

 

 

10

0.10

Yes

Yes

No

 

 

12

0.12

Yes

Yes

No

 

 

16

0.15

Yes

No

No

Panel of agg

lomerating

(density 800

(Kg/m3)

 

 

 

 

0.14

8

0.06

Yes

Yes

Yes

 

 

10

0.08

Yes

Yes

Yes

 

 

12

0.09

Yes

Yes

Yes

 

 

16

0.12

Yes

Yes

Yes

Paneling

  drinks

 

 

 

 

 

 

0.14

8

0.06

Yes

Yes

Yes

 

 

10

0.07

Yes

Yes

Yes

 

 

12

0.09

Yes

Yes

Yes

 

 

16

0.11

Yes

Yes

No

 

 

18

0.13

Yes

No

No

 

 

20

0.16

Yes

No

No

Placoplâtre

 

 

 

 

 

 

 

0.13

6

0.05

Yes

Yes

Yes

 

 

9

0.07

Yes

Yes

Yes

 

 

13

0.10

Yes

Yes

No

Panel fiber

compresser

 

 

 

 

 

 

0.13

3.2

3.2

Yes

Yes

Yes

 

 

6.4

6.4

Yes

Yes

Yes

Panel fibre

light

 

 

 

 

 

 

0.11

6

0.05

Yes

Yes

Yes

 

 

9

0.08

Yes

Yes

Yes

 

 

11.5

0.11

Yes

Yes

Yes

Tile ceiling

 

 

 

 

 

 

 

0.14

6

0.04

Yes

Yes

Yes

Plywood

Birch.

 

 

 

 

 

 

0.147

6.5

0.06

Yes

Yes

Yes

 

 

9

0.08

Yes

Yes

Yes

 

 

12

0.11

Yes

Yes

No

 

 

15

0.14

Yes

No

No

 

 

18

0.16

Yes

No

No

Plywood

tenderWood

 

 

 

 

 

 

0.11

6.5

0.08

Yes

Yes

Yes

 

 

9

0.11

Yes

Yes

No

 

 

12

0.14

Yes

No

No

 

 

15

0.19

No

No

No

 

 

18

0.21

No

No

No

Values admissible maxima, of the thermal resistor:

 

THERMAL CONDUCTIVITE (BTU/ h ft):

Cork plates of it

  • Tablet 0.1
  • Pure Expansé 0,043
  • Expansé agglomerated the [brai] 0,048
  • Expansé agglomerate resins 0,048
  • Fibrous panels, hard 0.12
  • Fibrous panels, light 0,035
Mineral fibers
  • Wool of rock 0,041
  • Wool of glass 0.03 to 0.07

Plastic matters, mosses and various

  • Balsa 0,052
  • Polystyrène [expansé] 0,036 to 0,044
  • Foam [formophénolique] 0,037 to 0,046
  • Rigid moss 0,029 to 0,035

Vermiculite or [perlite]

  • Plate 0.14 to 0,058

 

Return MAIN MENU: